Will restore hdd disk
HDD recovery can be a difficult task, but here are some steps you can try:
1. Check the connection: Make sure that the SATA or IDE cable (depending on the type of your drive) is correctly connected to both the hard drive itself and the motherboard.
2. Replacing the cable: If you are sure of the correct connection and there are still problems with the recognition of the disk by the computer, then you should replace the used SATA/IDE cable with a new one to check.
3. Use the second port: If using the Serial ATA interface (SATA), switch the connecting wire to the second available port of the SATA controller on the motherboard.
4. Data recovery software: There are various programs for data recovery from damaged hard drives, such as TestDisk or Recuva.
a) TestDisk is a powerful tool for working with lost partitions of MBR/GPT tables and FAT32/NTFS/exFAT/ext2/ext3/ext4/HFS+/UFS/UFS2/ZFS file systems;
b) Recuva provides the ability to restore accidentally deleted files from the hard drive.
5. Contact professionals: If all of the above methods did not help, you should contact a data recovery specialist or the service center of the manufacturer of your HDD for help.
It is important to note that there is always a risk of losing information forever when attempting self-repair and using data recovery programs. Therefore, before starting any manipulations, it is better to create a backup of all important data on another reliable drive.