Restoring data from a non-working hard drive
Restoring data from a non-working hard drive can be a difficult task that requires specialized knowledge and tools. However, there are several steps that you can try on your own before turning to professionals:
1. Check the connection: Make sure that all the cables between the computer and the hard drive are properly connected.
2. Use a second port or a computer: If possible, reconnect the hard drive to the second SATA port of your motherboard or use it on a second computer to check performance.
3. Start the BIOS/UEFI Setup Utility: You may need to make changes in the BIOS (setting the AHCI operating mode) so that the system sees the HDD
4. Data recovery software:
– Recuva is a simple program with a free license.
– TestDisk is an excellent choice for lost partitions or damaged bootloaders.
– EaseUS Data Recovery Wizard Free Edition — this program offers 500 MB of free information recovery
5. Seek help from professionals: If all the above methods did not help, it is better to contact a data recovery specialist. They have access to more sophisticated tools and technologies for extracting information from damaged hard drives.
It is important to note that when working with a non-working hard disk, there is always a risk of worsening the problem or complete data loss. Therefore, before performing any manipulations, you should create a backup copy of all valuable files on other storage media.