Raid 10 recovery
RAID 10 (also known as RAID 1+0) is a combination of two RAID levels: mirroring and striping. In this array, the data is divided into blocks that are written simultaneously to several hard drives in mirror mode, and then these copies of the data are combined to create a single logical volume.
One of the main reasons to use RAID 10 is to increase the reliability of data storage. If one or more disks fail, then the information still remains available with the help of other working disks in the array.
In cases of loss of operation or failure of the hard disk in the RAID 10 array, the process of its recovery may be needed. First, check the status of all system components and determine the exact cause of the error/failure.
If the failure is related only to the current configuration of the mass storage controller software without physical damage to the HDD module itself, it is possible to reboot the server glass of the PC or to perform the trigger pump operation by remote command.
However, if the problem is related to physical damage to the disk or its complete failure, then recovery may be more difficult and require specialized tools and the services of professionals. In such cases, it is recommended to contact certified data recovery experts for assistance.
It is important to understand that independent attempts to restore RAID 10 without the necessary knowledge and experience can only aggravate the situation and harm your information. Therefore, it is always better to seek help from professional data recovery companies when such problems arise.